Welcome to the Green Sky Engine Packing  Images page. 
There are differences between the Fan Cooled vs Liquid Cooled which prevent an effective multi-use container.
We will expand this page as time permits. Also, we have, and are considering the logistics of providing shipping containers. There is no corner on ingenuity. If you have an idea to share in this regard, we would love to hear it.
02/10/04
 

Click for 503

Click for 582

Depending on your browser, to see enlarged images right click on any image then select "view image ..." 

With a little planning, we can build this container from a half sheet of plywood and one 8 ft 2x6. Rip a 4x8 sheet into two 24 inch pieces. (save the second half for your next box or other project) Rip the 2x6 into 3 pcs. It's probably ok to just start out with 2x2's, but it might actually be more expensive.	Top and bottoms are identical. 12" wide, and 23 1/4" long, (if using 3/8" ply) If using 1/8 paneling, the cut length is 23 3/4". If 1/4" ply, the cut length is 23 1/2" and do on ...you get the idea? Screw the plywood to your 2x2's as shown above
	A relief is cut for "gearbox down" configuration of this the A/B gearbox
	Don't for get the hand holds. When it comes to human handling, these make the container user friendly.
	For the up turned water outlet on 582 model 99, notch out here for clearance, or remove the water outlet.